HomeSenders and SensorsOil Pressure sensors

Oil Pressure 5 bar Sender M12 x 1.5 (ER) replaces VDO unit one Post
Oil Pressure 5 bar Sender M12 x 1.5 (ER) replaces VDO unit one Post

Oil Pressure 5 bar Sender M12 x 1.5 (ER) replaces VDO unit one Post

Product information

Electrical Oil Pressure 5 bar sender unit M12 x 1.5 Fits VDO Oil Pressure Gauges

0 to 5 bar Sender Unit Ref: 970930

Ring terminal connection
(ER) Earth Return

Works with both 12V and 24V

Ground connection made through threads

OEM names and numbers are used for reference purposes only.

We Supply Brand New Alternators / Starter Motors / DC Motors / Dynastarters / Relays / Fuel Pumps

Warranty The Company warrants all equipment supplied by it to be free from defects in material or workmanship under normal use. All such equipment with the benefit of this warranty only the company's obligation hereunder is limited to repairing or replacing at our office. One year from date of shipment and which its examination shall disclose to its satisfaction to have been defective. This warranty is expressly in lieu of all other conditions and warranties expressed or implied (whether by statue or otherwise) and of all obligations or liabilities on its part for damages following the use of the article supplied.


What type senders do I need, standard or insulated earthed?

First of all let's explain what standard senders and insulated senders mean.
Standard earthed senders tend to have one terminal which is where you connect the signal wire from the gauge, and the sender earths itself through the engine or casing. Insulated senders tend to have two terminals, one terminal is for the signal wire from the gauge and the other is to run to an earth/negative on the battery. So the first thing to check is if your engine is standard earth or insulated earth. A good way to do this is to see if the negative terminal of your starter motor is connected to the engine. If it is then it is more than likely that your engine is standard earthed and you can use standard earthed senders. If you find it is connected to the negative of the battery then you are best to use insulated earthed senders. If in doubt we recommend consulting a qualified and competent Marine Auto Electrician.

Technical specifications

Brand: Veethree
Product Code: 970930
Weight: 0.2kg